TCL D55A561U 40-RT9507-MAD4HG黑屏

wfng

黑屏
打印信息如下：


[13:55:03.494]收←◆

GGoo
ARM

[13:55:03.525]收←◆JR

U-Boot 2012.07-svn889713 (Dec 16 2015 - 16:16:53)

GPU : BISR testing...
GPU : Finish BISR testing (OK)
SCPU: BISR testing ....
SCPU: Finish BISR testing (OK)
CPU  : Cortex-A9 dual core
Media: eMMC BP0
MISC : set FUSE_RDY
MISC: efuse had NOT been written
DRAM:  1 GiB
Watchdog: Enabled
init_amp_prepare
Board: Tv030 2995 Board
REG_AC_DC_ON_reg: 0x0
POWER ON: AC
Cache: Enabled
Non-Cache Region: 1 MB@0x0b300000
MMC:   
emmc:mmc_initial(1) Dec 16 2015 16:17:24
RTD299x eMMC: 0

[13:55:03.619]收←◆Device: RTD299x eMMC
Manufacturer ID: 11
OEM: 100
Name: 004G9
Tran Speed: 52000000
Rd Block Len: 512
MMC version 4.0
High Capacity: Yes
Capacity: 3.7 GiB
Bus Width: 8-bit
Extern param: MMC blk:0x7c (to 0x9000)
         rtk_eMMC_read blk_addr=0x0000007c, data_size=0x00000800, buffer=0x00009000
Factory: MMC
         rtk_eMMC_read blk_addr=0x0000c000, data_size=0x00000200, buffer=0x0b200008
         rtk_eMMC_read blk_addr=0x0000c072, data_size=0x00000400, buffer=0x0b200210
         rtk_eMMC_read blk_addr=0x0000e000, data_size=0x00000200, buffer=0x0b200008
         rtk_eMMC_read blk_addr=0x0000e074, data_size=0x00000400, buffer=0x0b200210
         rtk_eMMC_read blk_addr=0x0000e000, data_size=0x0000e800, buffer=0x0a900000
Factory: seq:0x9606, blk:0xe000(pp:1), size:0xe800 (to 0xa900000)
get_bootparam:
hardwarewatchdog  occur cnt is 0x00000000
------------tmp/factory/bin_panel/000BootParam.h found
BOOT_POWER_ON_MODE=1
BOOT_LOGO_ENABLE=1
CUSTOM_VIDEO1_LENG=2272770
CUSTOM_VIDEO2_LENG=0
BOOT_MUSIC_ENABLE=0
CUSTOM_AUDIO1_LENG=103574
CUSTOM_AUDIO2_LENG=0
BOOT_IMAGE_ENABLE=0
BOOT_AFTER_UPDATE=0
BOOT_MUSIC_VOLUME=15
LOCAL_UPGRADE_EN not found
[bootparam.c 183]:can't find local_upgrade_en
BOOTUP_POLICY=0
VIDEO_PTS_LENG=0
AUDIO_PTS_LENG=0
REF_CLO
[13:55:03.791]收←◆CK_LENG=136
AUDIO_CODEC_TYPE=16
PRIVATE_DATA_0=2
PRIVATE_DATA_1=3
PRIVATE_DATA_2=16777216
PRIVATE_DATA_3=0
PRIVATE_DATA_4=0
PRIVATE_DATA_5=0
PRIVATE_DATA_6=0
PRIVATE_DATA_7=0
148boot_power_on_mode=1
0x60012340=-1
bootup_policy=0
boot_power_on_mode=0
boot_ac_on=1
get_layout:
------------tmp/factory/layout.txt found
BOOTPART=0
TAG=21
[ENV] read_env from factory failed
[ENV] Using default environment variables

ee read 343, 1
name=EEP_I2C ppcb_en
[13:55:03.837]收←◆um.Name=EEP_I2C, ppcb_enum.info=4
EEP_I2C=4
name=EEP_DEVICE_ADDR ppcb_enum.Name=EEP_DEVICE_ADDR, ppcb_enum.info=50
name=PIN_EEP_WP ppcb_enum.Name=PIN_EEP_WP, ppcb_enum.info=100011304
m_PIN_EEP_WP = 0x100011304
ee read 366, 1
ee read 647, 1

 Eeprom.c GetProjectID() projectID = 118 
panelName_PID118 = [PI_LSC550FN04_4K2K_NO3D_VFLP1] in tmp/factory/bin_panel/pid_panel_list.h
Panel: Use parameters in tmp/factory/bin_panel/panel.bin
Panel: PI_LSC550FN04_4K2K_NO3D_VFLP1

[Jason_Yang] panel_init_1st start

[Jason_Yang] boot_power_on_mode = 0

[Jason_Yang] boot_mode = 2

[Jason_Yang] line =2607,  panel_init_1st_is_done=0

[Jason_Yang] line =26
[13:55:03.900]收←◆11, boot_power_on_mode == POWER_OFF return  
In:    serial
Out:   serial
Err:   serial
Net:   rtl8139: REALTEK RTL8139 @0xb8016000
Hit Esc or Tab key to enter console mode or rescue linux:  0 ee read 343, 1
ee read 366, 1
ee read 647, 1

 Eeprom.c GetProjectID() projectID = 118 
ee read 2894, 1

[Haha] debug key_pad_five_enable=1
################# index:hitvalue:torrence:lsadc_key1  0:55:3:63
[13:55:03.947]收←◆
======== Checking into android recovery ====
REBOOT_RTCWCR_reg: 0

Start Boot Setup ...
         rtk_eMMC_read blk_addr=0x00010000, data_size=0x00000020, buffer=0x0a820000
         rtk_eMMC_read blk_addr=0x00010000, data_size=0x00000400, buffer=0x0a820000
         FW Table to 0x0a820000, size=0x00000400 (0x0a820400)
         FW Table fr 0x02000000, fw count: 13
Normal boot fw follow...
Linux Kernel:
         FW Image to 0x0010800
[13:55:03.994]收←◆0, size=0x009c7de4 (0x00acfde4)
         FW Image fr 0x02008000 (non-lzma)
Audio FW:
         FW Image to 0x81700000, size=0x00288b58 (0x81988b58)
         FW Image fr 0x029cfe00 (non-lzma)
         Enter standby, skip this entry
Video FW 1:
         FW Image to 0x81a00000, size=0x002d8488 (0x81cd8488)
         FW Image
[13:55:04.025]收←◆fr 0x02c58a00 (non-lzma)
         Enter standby, skip this entry
Video FW 2:
         FW Image to 0x81d00000, size=0x000b3504 (0x81db3504)
         FW Image fr 0x02f31000 (non-lzma)
         Enter standby, skip this entry
ECPU FW:
         FW Image to 0x00004000, size=0x000026e9 (0x000066e9)
         FW Image fr 0x02fe4600 (non-lzma)
         rtk_eMMC
[13:55:04.056]收←◆_read blk_addr=0x00017f23, data_size=0x000026e9, buffer=0x00004000
         FW Image entry  checksum=0x001016f2
         FW Image result checksum=0x001016f2
Video data 1:
         FW Image to 0x86100000, size=0x00aaed22 (0x86baed22)
         FW Image fr 0x02fe6e00 (non-lzma)
         Enter standby, skip this entry
Audio data 1:
Video data 2:
Audio data 2:
Video data 3:
AUDIO PTS:
VIDEO PTS:
REFCLOCK:
Final checksum check:
entry: 0x00004000, origin one 0x001016f2, current one 0x001016f2
         Kernel entry to 0x00108000, size=0x009c7de4 (0x00acfde4)
         Kernel entry f
[13:55:04.103]收←◆r 0x02008000 (non-lzma)
         rtk_eMMC_read blk_addr=0x00010040, data_size=0x009c7de4, buffer=0x00108000

[13:55:05.275]收←◆         Kernel entry  checksum=0x3879a
[13:55:05.306]收←◆844
         Kernel result checksum=0x3879a844

[HaHa] [2-2] panel_init_2nd start

[HaHa] [2-2] boot_power_on_mode = 0

[HaHa] [2-2] boot_mode = 2

[HaHa] [2-2] line =3095,  panel_init_2nd_is_done=0

[HaHa] [2-2] line =3098, boot_power_on_mode == POWER_OFF return  
[FAC] factory_save: MMC

[13:55:05.353]收←◆[FAC] Save to eMMC (blk#:0xc000, buf:0x0a900000, len:0xe600)
[FAC] Save to eMMC (seq#:0x9607, pp:0)

(rtkpm_clr_share_mem)2013/04/23 14:55
ee read 343, 1
ee read 366, 1
ee read 647, 1

 Eeprom.c GetProjectID() projectID = 118 
ee read 2894, 1
ee read 2895, 1

[Haha] debug key_pad_five_enable=1

[Haha] debug
[13:55:05.400]收←◆ breath_led_enable=1
name=POWER_EN ppcb_enum.Name=POWER_EN, ppcb_enum.info=100010c04
name=PIN_KEYPAD_PWR ppcb_enum.Name=PIN_KEYPAD_PWR, ppcb_enum.info=300000001
name=PIN_KEYPAD_MENU ppcb_enum.Name=PIN_KEYPAD_MENU, ppcb_enum.info=337000001

(rtkpm_clr_share_mem)2013/04/23 14:55

(powerMgr_setup_power_en)2012/05/0
[13:55:05.431]收←◆9 15:55
Power enable line have 2 set.
en_power para0=0x100010c04
GET_PIN_TYPE:4
en_power para1=0x0
GET_PIN_TYPE:0
pm_event_msg=0x100000

(powerMgr_setup_irda)2012/05/09 15:55
IrDA Protocol is 8
IR_KEY1=0xf2a0d5
IR_KEY2=0x20b
IR_KEY3=0x20b
IR_KEY4=0x18e7e7e7
pm_event_msg=0x140000

(powerMgr_setup_keypad_multi)2012/05/09 15:55
keypad param0=0x300000001
kptype=1
kpidx=0
PCB_PIN_TYPE_LSADC
KEYPAD_PARM0=0x  100003
keypad param1=0x337000001
kptype=1
kpidx=0
PCB_PIN_TYPE_LSADC
KEYPAD_PARM1=0x  103703
Valid keypad paramteter have 2 set.
pm_event_msg=
[13:55:05.478]收←◆0x140002
ee read 2892, 1
 Eeprom.c GetBreathingMode BreathingMode = 0 
Kernel command line: androidboot.console=ttyS0 console=ttyS0,115200 envp=100700 flashtype=emmc mmcparts=rtkemmc:3866624k,1048576k(/system),2084864k(/data),262144k(/cache),16384k(/res) quiet POWERDOWN ac_on
[       0][1960 ms]  bootcode end
Starting kernel ...

[13:55:05.572]收←◆GET_EVENT_MSG() (0xb8060500) = 0x140002

start MAGELLAN EMCU - May 21 2015 14:23:19
share_reg[0x0]:0x140002
share_reg[0x1]:0x100003
share_reg[0x2]:0x103703
share_reg[0x3]:0x0
share_reg[0x4]:0x0
share_reg[0x5]:0x0
share_reg[0x6]:0x0
share_reg[0x7]:0x12345671
share_reg[0x8]:0x0
share_reg[0x9]:0x0
share_reg[0xa]:0x0
share_reg[0xb]:0x0
share_reg[0xc]:0x0
share_reg[0xd]:0x8
share_reg[0xe]:0xf2a0d5
share_reg[0xf]:0x20b
share_reg[0x
[13:55:05.650]收←◆10]:0x20b
share_reg[0x11]:0x18e7e7e7
share_reg[0x12]:0x0
share_reg[0x13]:0x0
share_reg[0x14]:0x0
share_reg[0x15]:0x0
share_reg[0x16]:0x0
share_reg[0x17]:0x0
share_reg[0x18]:0x0
share_reg[0x19]:0x0
share_reg[0x1a]:0x0
share_reg[0x1b]:0x0
share_reg[0x1c]:0x0
share_reg[0x1d]:0xc00
share_reg[0x1e]:0x0
share_reg[0x1f]:0x0
share_reg[0x20]:0x0
share_reg[0x21]:0x0
share_reg[0x22]:0x0
share_reg[0x23]:0x0
share_reg[0x24]:0x0
share_reg[0x25]:0x0
share_reg[0x
[13:55:05.712]收←◆26]:0x0
share_reg[0x27]:0x0
share_reg[0x28]:0x0
share_reg[0x29]:0x0
share_reg[0x2a]:0x0
share_reg[0x2b]:0x0
share_reg[0x2c]:0x0
share_reg[0x2d]:0x0
share_reg[0x2e]:0x0
share_reg[0x2f]:0x0
share_reg[0x30]:0x0
share_reg[0x31]:0x0
share_reg[0x32]:0x0
share_reg[0x33]:0x0
share_reg[0x34]:0x0
share_reg[0x35]:0x0
share_reg[0x36]:0x0
share_reg[0x
[13:55:05.759]收←◆37]:0x0
share_reg[0x38]:0x0
share_reg[0x39]:0x0
share_reg[0x3a]:0x0
share_reg[0x3b]:0x0
share_reg[0x3c]:0x0
share_reg[0x3d]:0x0
share_reg[0x3e]:0x0
share_reg[0x3f]:0x0
share memory have showed!

Power pin have 0x1 set
Poff
power off finish

[13:55:07.447]收←◆0x0 MINUTE passed...

[13:55:15.525]收←◆timeup, wakeup system
let AC_DC_on_reg = DC_on

[13:55:18.541]收←◆
Power pin have 0x1 set
Pon
[13:55:18.587]收←◆
EMCU final!

[13:55:18.744]收←◆0xb8000804=0xF0F0F010
0xb8000808=0xF0F0F0F0
0xb8000810=0x10101010
0xb8000814=0xF0101010
0xb8000818=0x1010F0F0

[13:55:18.869]收←◆  part cfg    : 0x02
  boot cfg    : 0x00
  boot wp sts : 0x00
  boot wp     : 0x00
  part cfg    : 0x01
  boot cfg    : 0x00
  boot wp sts : 0x00
  boot wp     : 0x00

[13:55:18.947]收←◆  part cfg    : 0x00
  boot cfg    : 0x00
  boot wp sts : 0x00
  boot wp     : 0x00

[13:55:19.119]收←◆boot part idx = 0x00000000

[13:55:19.431]收←◆

GGoo
ARM

[13:55:19.462]收←◆JR

U-Boot 2012.07-svn889713 (Dec 16 2015 - 16:16:53)

GPU : BISR testing...
GPU : Finish BISR testing (OK)
SCPU: BISR testing ....
SCPU: Finish BISR testing (OK)
CPU  : Cortex-A9 dual core
Media: eMMC BP0
MISC : set FUSE_RDY
MISC: efuse had NOT been written
DRAM:  1 GiB
Watchdog: Enabled
init_amp_prepare
Board: Tv030 2995 Board
REG_AC_DC_ON_reg: 0x2379beef
POWER ON: DC
Cache: Enabled
Non-Cache Region: 1 MB@0x0b300000
MMC:   
emmc:mmc_initial(1) Dec 16 2015 16:17:24
RTD299x eMMC: 0

[13:55:19.556]收←◆Device: RTD299x eMMC
Manufacturer ID: 11
OEM: 100
Name: 004G9
Tran Speed: 52000000
Rd Block Len: 512
MMC version 4.0
High Capacity: Yes
Capacity: 3.7 GiB
Bus Width: 8-bit
Extern param: MMC blk:0x7c (to 0x9000)
         rtk_eMMC_read blk_addr=0x0000007c, data_size=0x00000800, buffer=0x00009000
Factory: MMC
         rtk_eMMC_read blk_addr=0x0000c000, data_size=0x00000200, buffer=0x0b200008
         rtk_eMMC_read blk_addr=0x0000c072, data_size=0x00000400, buffer=0x0b200210
         rtk_eMMC_read blk_addr=0x0000e000, data_size=0x00000200, buffer=0x0b200008
         rtk_eMMC_read blk_addr=0x0000e074, data_size=0x00000400, buffer=0x0b200210
         rtk_eMMC_read blk_addr=0x0000c000, data_size=0x0000e400, buffer=0x0a900000
Factory: seq:0x9607, blk:0xc000(pp:0), size:0xe400 (to 0xa900000)
get_bootparam:
hardwarewatchdog  occur cnt is 0x00000000
------------tmp/factory/bin_panel/000BootParam.h found
BOOT_POWER_ON_MODE=1
BOOT_LOGO_ENABLE=1
CUSTOM_VIDEO1_LENG=2272770
CUSTOM_VIDEO2_LENG=0
BOOT_MUSIC_ENABLE=0
CUSTOM_AUDIO1_LENG=103574
CUSTOM_AUDIO2_LENG=0
BOOT_IMAGE_ENABLE=0
BOOT_AFTER_UPDATE=0
BOOT_MUSIC_VOLUME=15
LOCAL_UPGRADE_EN not found
[bootparam.c 183]:can't find local_upgrade_en
BOOTUP_POLICY=0
VIDEO_PTS_L
[13:55:19.728]收←◆ENG=0
AUDIO_PTS_LENG=0
REF_CLOCK_LENG=136
AUDIO_CODEC_TYPE=16
PRIVATE_DATA_0=2
PRIVATE_DATA_1=3
PRIVATE_DATA_2=16777216
PRIVATE_DATA_3=0
PRIVATE_DATA_4=0
PRIVATE_DATA_5=0
PRIVATE_DATA_6=0
PRIVATE_DATA_7=0
148boot_power_on_mode=1
0x60012340=-1
bootup_policy=0
boot_power_on_mode=1
boot_ac_on=0
get_layout:
------------tmp/factory/layout.txt found
BOOTPART=0
TAG=21
init_amp
[ENV] read_env from factory failed
[ENV] Using default environment variables

ee read 330, 12
name=EEP_I2C ppcb_enum.Name=EEP_I2C, ppcb_enum.info=4
EEP_I2C=4
name=EEP_DEVICE_ADDR ppcb_enum.Name=EEP_DEVICE_ADDR, ppcb_enum.info=50
name=PIN_EEP_WP ppcb_enum.Name=PIN_EEP_WP, ppcb_enum.info=10001
[13:55:19.791]收←◆1304
m_PIN_EEP_WP = 0x100011304
a. Eeprom_Read-macaddr is 3c591e1c69de
 set_mac_cmd is 3c:59:1e:1c:69:de 
ee read 343, 1
ee read 366, 1
ee read 647, 1

 Eeprom.c GetProjectID() projectID = 118 
panelName_PID118 = [PI_LSC550FN04_4K2K_NO3D_VFLP1] in tmp/factory/bin_panel/pid_panel_list.h
Panel: Use parameters in tmp/factory/bin_panel/panel.bin
Panel: PI_LSC550FN04_4K2K_NO3D_VFLP1

[Jason_Yang] panel_init_1st s
[13:55:19.837]收←◆tart

[Jason_Yang] boot_power_on_mode = 1

[Jason_Yang] boot_mode = 2

[Jason_Yang] line =2607,  panel_init_1st_is_done=0

=[panel.c]=auto power==
2846
***** set DPLL Later *****
================== P_VBY1_4K2K condition ===================
***** Get Chip ID (3) *****
================== VBY_ONE_PANEL_CHINA_STAR_4K2K_VBY1 ===================
ee read 343, 1
ee read 366, 1
[1;
[13:55:19.884]收←◆34mee read 647, 1

 Eeprom.c GetProjectID() projectID = 118 
DispI : Finish BISR testing done
DispD : Finish BISR testing done
2849
ee read 343, 1
ee read 366, 1
[
[13:55:19.916]收←◆1;34mee read 647, 1

 Eeprom.c GetProjectID() projectID = 118 
ee read 2893, 1

[Haha] debug mixbacklight_enable=1

[13:55:19.947]收←◆
[Jason_Yang] panel_init_1st e
[13:55:19.978]收←◆nd
In:    serial
Out:   serial
Err:   serial
Net:   rtl8139: REALTEK RTL8139 @0xb8016000
Hit Esc or Tab key to enter console mode or rescue linux:  0 ee read 343, 1
ee read 366, 1
ee read 647, 1

 Eeprom.c GetProjectID() projectID = 118 
ee read 2894, 1

[Haha] debug key_pad_five_enable=1
################# index:hitvalue:torrence:lsadc_key1  0:55:3:63
======== Checking into android recovery ====

Start Boot Setu
[13:55:20.025]收←◆p ...
         rtk_eMMC_read blk_addr=0x00010000, data_size=0x00000020, buffer=0x0a820000
         rtk_eMMC_read blk_addr=0x00010000, data_size=0x00000400, buffer=0x0a820000
         FW Table to 0x0a820000, size=0x00000400 (0x0a820400)
         FW Table fr 0x02000000, fw count: 13
Normal boot fw follow...
Linux Kernel:
         FW Image to 0x00108000, size=0x009c7de4 (0x00acfde4)
[13:55:20.072]收←◆
         FW Image fr 0x02008000 (non-lzma)
Audio FW:
         FW Image to 0x81700000, size=0x00288b58 (0x81988b58)
         FW Image fr 0x029cfe00 (non-lzma)
         rtk_eMMC_read blk_addr=0x00014e7f, data_size=0x00288b58, buffer=0x01700000

[13:55:20.369]收←◆         FW Image entry  checksum=0x0c6
[13:55:20.400]收←◆ea100
         FW Image result checksum=0x0c6ea100
Video FW 1:
         FW Image to 0x81a00000, size=0x002d8488 (0x81cd8488)
         FW Image fr 0x02c58a00 (non-lzma)
         rtk_eMMC_read blk_addr=0x000162c5, data_size=0x002d8488, buffer=0x01a00000

[13:55:20.744]收←◆         FW Image entry  checksum=0x097c9127
         FW Image result checksum=0x097c9127
Video FW 2:
         FW Image to 0x81d00000, size=0x000b3504 (0x81db3504)
         FW Image fr 0x02f31000 (non-lzma)
         rtk_eMMC_read blk_addr=0x00017988, data_size=0x000b3504, buffer=0x01d00000

[13:55:20.853]收←◆         FW Image entry  checksum=0x027
[13:55:20.884]收←◆7d02d
         FW Image result checksum=0x0277d02d
ECPU FW:
         FW Image to 0x00004000, size=0x000026e9 (0x000066e9)
         FW Image fr 0x02fe4600 (non-lzma)
         rtk_eMMC_read blk_addr=0x00017f23, data_size=0x000026e9, buffer=0x00004000

[13:55:20.916]收←◆         FW Image entry  checksum=0x001016f2
         FW Image result checksum=0x001016f2
Video data 1:
         FW Image to 0x86100000, size=0x00aaed22 (0x86baed22)
         FW Image fr 0x02fe6e00 (non-lzma)
         rtk_eMMC_read blk_addr=0x00017f37, data_size=0x00aaed22, buffer=0x06100000

[13:55:22.134]收←◆Audio data 1:
Video data 2:
Au
[13:55:22.166]收←◆dio data 2:
Video data 3:
AUDIO PTS:
VIDEO PTS:
REFCLOCK:
Final checksum check:
entry: 0x01700000, origin one 0x0c6ea100, current one 0x0c6ea100
entry: 0x01a00000, origin one 0x097c9127, current one 0x097c9127
entry: 0x01d00000, origin one 0x0277d02d, current one 0x0277d02d
[13:55:22.228]收←◆
entry: 0x00004000, origin one 0x001016f2, current one 0x001016f2
Enable VCPU1
Enable VCPU2
aa 0xffff0010, 0x0, 0x0, 0x0
Release HW semaphore
ABCD-------------------
Audio Version = 865380 (nallegam)
Common Version = 835941
Binary src compiled at Sep 22 2015 18:35:50
Note = SQA_DailyBuild
-------------------

[13:55:22.275]收←◆[BOOT_AIO][0]  0x00000000
[BOOT_AIO][1]  0x00000000
[BOOT_AIO][2]  0x00000000
[BOOT_AIO][3]  0x00000000
[AIO_PATH] use default setting!
[AIO_PATH] src_sel_aio1      =  0x00000001
[AIO_PATH] src_sel_headphone =  0x00000002
[AIO_PATH] src_sel_pcm_daenca0b l e=_ c l0oxc0k0 03040 0h0o2l
d[_hAwI_Os_PeAmaTHp]h osrrec_
VVwwaaiitt  sel_pcm_dac1  =  0x00000004
spdif raw from PB

VCPU1: BISR testing ....
VCPU1 : Finish BISR testing done


VCPU2: BISR testing ....
VCPU2 : Finish BISR testing done

aa 0x74811a3c, 0x74605a27, 0x8004003, 0x0
Release HW semaphore again
V1go V2go
[HaHa] [2-2] RpoanseSlt_RairotsnSTiattarstk_CT2arsnekCadrt eesHatoteoakH oro1t3k  123

2V
1
  V0p[ kHtpQakt  QH0 x a08]1x d88[1d28c-8a0902,0]0 , s szbz o8 o 81 t61_ 68 p8o
wer_
on_mode = 1

[HaHa] [[2v-o2]]  v1b PooLLt__VOmDoMAd em/ =n 2/o  9/
0/0,
c [lk:H aH29a]7 [020-020]0 l0i
n[ev o=] 30v915 ,vs y npcagneenl _cinlitk__2dnidv__n:is _d9o/ne29=700 0
00[01
[;v3o4] vme1e  rvseyancd g3e4n3, r 1ati[om_n
_off:
[13:55:22.384]收←◆2[/12;73844m3ee75 0re
a[dv o3]6 6v, 11 [mvsync
gen div2[:1; 314m39e218e7 r5e
[adv 6o4]7,  v11 v[msy
ncgen f
reer[1u;3n:1 0m /E2ep7r00o0m00.0c/ 60G0et0P0r/o45j0e0c0tI0D
([) pvo] rvo1 jvesctyncIgDe =n  1v1s8  wmdt
h:
27-0--00h00a0h/a5--2-5he/r85e7 B
L[ vONo l] v2 iPneL=L3_1V7O3D,MdA em/ln/ayo  9/300/0
0, clk: 297000000
[vo] v2 vsyncgen clk_div_n: 9/29700000
[vo] v2 vsyncgen ratio_n_off: 2/27843750
[vo] v2 vsyncgen div2: 13921875
[vo] v2 vsyncgen freerun: 0/27000000/60000/450000
[vo] v
[13:55:22.431]收←◆2 vsyncgen vs width: 27000000/525/857
[vo] Vodma(0) disable
[vo] VODMA(0) ForceBG(0)
[vo] Vodma(1) disable
[vo] VODMA(1) ForceBG(0)
VP_PowerOnVideo 33
magic= 0x53544433, ptsAddr= 0x00000000, ptsSize= 0x00000000, ibBase= 0x82502000, [vo] Vodma(0) enable
~vbm create  0xa2504000, 348
[13:55:22.462]收←◆80
VBM: configured to DivX HD!
~detect query panel type 0
[vo] ShowChannel(p0)
[V1]++init 5
H264_DEC: INIT_RING_BUF_STREAM0:
base= 0x06100000 limit= 0x06baed30 pWr= 0x86baed22 *pRd= 0x86100000
H264_DEC: INIT_RING_BUF_COMMAND0:
pRd= 0xa2501e94 pWr= 0
[13:55:22.509]收←◆xa2501e84 write= 0x8250203c
VP_PowerOnVideo 478
H264_DEC: Unknown filter command type: 24
H264_DEC: RUN
VP_PowerOnVideo 483
$$dpb_bypass 0
H264_DEC: FLUSH
$$dpb_bypass 0
VBM: configuration unchanged!
~v0 VBM sz 320 240, blk 17 272
$$dpb_bypass 0
H264_DEC: NEW_SEG @ 0x86100000
$$dpb_bypass 0
H264_DEC: DECODE: decMode=0 sPTS= 0x0000000000000000 ePTS= 0x7fffffffffffffff
VBM: configuration unchanged!
~v0 VBM sz 1920 1088, blk 17 17

[13:55:22.556]收←◆[vo] p0 get 1st pic: 1920x1080x30, mode 4
[vo] VODMA_SyncGen_Check: p0, pic 1
[IDMA] 3D/I3D/Sen/Src=-16777238/0/0/0
Wait(1)=259/1080
DmaM=1

[13:55:22.666]收←◆
[vo] ipg1080p_frc_fhd_dibypas
[13:55:22.697]收←◆s !!!
[vo] VODMA_SendVOInfo
ptSlrVoInfo  mode=10
h_start=140
v_start=13
h_width=1920
v_length=1080
h_total=2200
v_total=1112
chroma_fmt=0
progressive=a1
hm_fprienqi=6t7 5at
vp_afnreelq =f59l9ow
,p i3xel2_clk2=1548
500000
i_ratio=0
source=0
ptSlrVoInfo  afd=8
3d_mode=i0ni
fto rTcAeS25d=07
N0UL7L
== ptSlrVoInfo

[13:55:22.775]收←◆***** Get Chip ID (3) *****
[Debug]Panel: DONE 0xb802d610 0xb802d610

[13:55:23.056]收←◆
[ao_Init] ver_D

bf [SB2_INSTAT] =  0x00000000
af [SB2_INSTAT] =  0x00000000

HDMI Raw Enable: MPG AC3 DTS MPEG2 AAC DDP WMAPRO MLP

SPDIF Raw Enable: MPG AC3 DTS MPEG2 AAC DDP WMAPRO MLP

Force 2ch Format: DTS DTSHD AC3 DDP MLP AAC WMAPRO

set global  0x00000000  0x0000bb80
set global  0x00000001  0x0000bb80
set global  0x00000002  0x0000bb80
set global  0x00000003  0x0000bb80
set global  0x00000004  0x0000bb80
set global  0x00000005  0x0000bb80
set global  0x00000006  0x0000bb80
set global  0x00000007  0x0000bb80
No Power On Music
[A] SetAudioDone to addr  0xa0001415 value  0x00000002

[13:55:23.181]收←◆
---haha---here BL ON line=3268,delay 300

---haha---here BL ON line=3272

[13:55:23.291]收←◆
[HaHa] [2-2] panel_init_2nd end
         Kernel entry to 0x00108000, size=0x009c7de4 (0x00acfde4)
         Kernel entry fr 0x02008000 (non-lzma)
         rtk_eMMC_read blk_addr=0x00010040, data_size=0x009c7de4, buffer=0x00108000

[13:55:24.509]收←◆         Kernel entry  checksum=0x3879a844
         Kernel result checksum=0x3879a844

[HaHa] [2-2] panel_init_2nd start

[HaHa] [2-2] boot_power_on_mode = 1

[HaHa] [2-2] boot_mode = 2

[HaHa] [2-2] line =3095,  panel_init_2nd_is_done=1

[HaHa] [2-2] line =3103, panel_init_2nd_is_done return  
[FAC] factory_save: MMC
[FAC] Save to eMMC (blk#:0xe000, buf:0x0a900000, len:0xe600)
[FAC] Save to eMMC (seq#:0x9608, pp:1)
Kernel command line: androidboot.console=ttyS0 console=ttyS0,115200 envp=100700 flashtype=emmc mmcparts=rtkemmc:3866624k,1048576k(/system),2084864k(/data),262144k(/cache),16384k(/res) reclaim=76M@32M last_image=8M@150M quiet
[       0][5139 ms]  bootcode end
Starting kernel ...

[13:55:24.869]收←◆[  153.888037] 0xb8061108 = 0x81159
[  153.891428] 0xb8061100 = 0x1808995d
[  153.895011] 0xb806022c = 0xf8f0f0f8
[  153.898737] 0xb8061100 = 0x1808915d
[  153.902317] 0xb806022c = 0xf8f0f0f8
[  153.905918] PIN type is
[13:55:24.916]收←◆PCB_PIN_TYPE_ISO_GPIO
[  153.956055] [IR] register as an mouse device.
[  153.960529] venus IR: allocate mouse device for tv030.
[  153.966367] Venus IR: success to reigster as mouse device

[13:55:24.978]收←◆[  153.976022] [linux][CBUS] MHL_init_module
[  153.980214] [linux]CBUS: register sucess!!! IRQ 57

[13:55:25.025]收←◆[  154.050379] mtdoops: mtd devi
[13:55:25.056]收←◆ce (mtddev=name/number) must be supplied

[13:55:25.103]收←◆[  154.124531] drivers/rtc/hctos
[13:55:25.134]收←◆ys.c: unable to open rtc device (rtc0)

[13:55:25.197]收←◆[  154.209907] init: /init.rc: 591: invalid option 'chmod'
[  154.215310] init: /init.rc: 592: invalid option 'chmod'
[  154.221357] init: /init.rtd299xboard.rc: 317: invalid option 'chmod'
[  154.227907] init: /init.rtd299xboard.rc: 318: invali
[13:55:25.244]收←◆d option 'chmod'

[13:55:25.806]收←◆[  154.823035] init: cannot find '/system/bin/rild', disabling 'ril-daemon'

[13:55:25.853]收←◆[  154.872171] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
[  154.883558] init: cannot find '/system/bin/startservice', disabling 'startservice'

[13:55:26.072]收←◆root@android:/ #
[13:55:26.994]收←◆[audio] AUDIO_CONFIG_CMD_VOLUME
[13:55:27.025]收←◆ 0x00000185

[13:55:28.634]收←◆[  157.646677] #@# hub_power_on(894) delay for 4 secs

[13:55:28.712]收←◆[  157.723332] xDCSwapChain:3
[  157.726141] xDCSwapChain:ok

[13:55:30.103]收←◆VO: EOS
WARNING[1]:POV: Wait sy
[13:55:30.134]收←◆stem to STOP Power on Video!(bVideoDone 2)
H264_DEC: STOP
$$dpb_bypass 0
H264_DEC: FLUSH
[vo] ShowChannel(p255)
[vo] HideChannel(p0)
[vo] VODMA(0) ForceBG(1)
~detect rx cmd 18 st 0
VP_FILTER_DEC.c,FILTER_DEC_Destroy ok,306 call  FILTER_DEC_Destroy liutao_debug
is_4k2k = 0, RunningFilter = 0
VIDEO_RPC_VideoDestroy Called!~VBM_Destroy

[13:55:30.197]收←◆~clear gpVBM
~VBM_Destroy ret 0
VBM_Destroy 268435456!VMM_Destroy 268435456!VIDEO_RPC_VideoDestroy Return!POV: Release Video
V0 pktQ  0xa1c8a900  0xa1d8d800

[13:55:30.447]收←◆V1 pktQ  0xa1d8d800  0xa1c8a900

[13:55:30.494]收←◆ao create num pin  0x00000004
++video malloc  0x90170000
~vbm create  0xb0170000, 34880

[13:55:30.587]收←◆VBM: configured to DivX HD!
~vbm already spcdirefa fitxe vdo l um0e xsbho0un17d0 f0r00om
PBV cBh M4/:5  pcatohn
[fiaogu_rSeatt_iOuotpuntS aumnplchinagRante2g]e fd!s =
48000(8)
[AUDIO] Receive debug memory address x  0x8196a430 !
[AUDIO] Debug memory address *x is  0x1dcc3000 !

SetLPrintBuffer: header address =  0x00000000
VIDEO_R
[13:55:30.650]收←◆PC_Se
tD[AeIb]ugINIMT(meimc oeryf fecCat ilnlfoed)!!!!
[AI][RSMP] create(0) DmemBuf= 0x904b4360,rsmpinfo= 0x90406fa0
[AI][RSMP] create(1) DmemBuf= 0x904b8370,rsmpinfo= 0x904073b0
[AI][RSMP] create(2) DmemBuf= 0x904bc380,rsmpinfo= 0x904077c0
[Audio] AuthKey( 0x12345678) mismatch!!! AC3
[Audio] AuthKey( 0x12345678) mismatch!!! DTS
[Audio] AuthKey( 0x12345678) mismatch!!! MLP {TrueHD}
[Audio] AuthKey( 0x12345678) mismatch!!! DDP {AC3+, EAC3}
[Audio] AuthKey( 0x12345678) mismatch!!! DTS HD
[Audio] AuthKey( 0x12345678) mismatch!!! DTS High Resolution
[Audio] AuthKey( 0x12345678) mismatch!!! DTS LBR
[Audio] AuthKey( 0x12345678) mismatch!!! DTS HD MA
High =  0x00000000, Low =  0x43c1b2ea
The following Format is supported:
MPEG
LPCM
WMA
AAC
VORBIS
MLP {TrueHD}
WMA Pro
MP4 LC-AAC
MP4 HE-AAC
RAW AAC
ADPCM
FLAC
ulaw PCM
alaw PCM
AMR

[13:55:30.853]收←◆[DEC downmix] 2(LoRo = 2,LtRt = 1), LFE = 0
WARNING[1]:VO: don't support this API line 123

[13:55:31.291]收←◆[RPC][SPDIF] PCM( 0x00000101)
[AO]SPDIF SELECTION: PCM FIFO

[13:55:31.431]收←◆Video pli memory addr[0]= 0xb0ed85a8
Video pli memory addr[1]= 0xb0ed8628
Video pli memory addr[2]= 0xb0ed86a8
Video pli memory addr[3]= 0xb0ed8a88
Video pli memory addr[4]= 0xb0ed8b3c
Video pli memory addr[5]= 0xb0edd66c
Video pli memory addr[6]= 0xb0edd5c0
Video pli memory addr[7]= 0xb0edd618
Video pli memory addr[8]= 0xb0edd648
Video pli memory addr[9]= 0x00000000
scalerDrv_Init

[13:55:31.572]收←◆Please set RTNR table before update RTNR table.

-[vo] FR Ctrl, Table[0]-
[vo] force: enable 0, framerate 59940
[vo] double dvs enable: 0, threshold 31000
[vo] High-Bound check: enable 1, Bound 60000, Adjust 60000
[vo] Low-Bound check: enable 0, Bound 47952, Adjust 59940

-[vo] FR Ctrl, Table[1]-
[vo] force: enable 0, framerate 59940
[vo] double dvs enable: 0, threshold 31000
[vo] High-Bound check: enable 1, Bound 60000, Adjust 60000
[vo] Low-Bound check: enable 0, Bound 47952, Adjust 59940
SCALERIOC_SET_PANEL_INFO
scalerInfo_setPanelInfo
VT/DV.STA/END=2250/45/2205, PanelType/Vflip=0/0
[vo] Vodma(0) disable
[vo] VODMA(0) ForceBG(0)
WARNING[1]:[vo] v_pos f_vodmago=0

[13:55:32.603]收←◆enter scalerVIP_SET_DCC_LEVEL_TABLE

scalerVIP_SET_DCCHist_Factor_TABLE
scalerVIP_SET_dbDCCHisto_TABLE

[13:55:33.384]收←◆[RPC] get AuthorityKey( 0xbd698272)

[13:55:33.744]收←◆++video malloc  0x90ef0000
~detect query panel type 0
<APP> create start( 0x90410580)
[SubCh] Create = 0xb0400ef0
[SubAO] SubAO    = 0xb0f80010
[SubAO] RdAdma1 BUF = 0xb0f800c0, size = 8192(samples), ch = 2

<APP> PP Create!!!!!!

[13:55:33.853]收←◆<APP> SmoothPlayback create
<APP> create end
common/VP_FILTER_Create
VP_FILTER.c(359): Create video encoder!
+++ Filter Enc Create
VP_FILTER.c(392): Create done, filter = 0xb0d30000!
~vencfilt init 0 255 2
[AE] samVpPler_aFtILe pTrERe =.c (( 60x500000)b:b8 0, S0etx0R0e00fbbC80l)k, .no.w. = (
V0Px0_000FIbbL8T0E, R.0xc0(00065b2b8)0):
[ ASE] eStRRC eoffCfl
k...done

[13:55:33.931]收←◆VP_FILTER.c(492): InitRingBuffer...
VP_FILTER.c(516): InitRingBuffer...done
VP_FILTER.c(492): InitRingBuffer...
VP_FILTER.c(516): InitRingBuffer...done
VP_FILTER.c(492): InitRingBuffer...
VP_FILTER.c(516): InitRingBuffer...done
~vpp proc cmd 36
~~vpp rx unknown cmd
++++ set res in 8084 64596 out 320 240
~vpp proc cmd 25
~vpp resol 320 240
~vpp proc cmd 32
~vpp fr 10
enc_slc rx fr 10
~vencfilt bitrate 8974000, rcmode 2
enc_slc rx rc 2, br 8974000, aq 0
VP_FILTER.c(555): Pause...
VP_FILTER.c(559): Pause...done
<APP> switch focus: 0xfffffffe -> 0x00000000
[AO]SPDIF SELECTION: PCM FIFO
<APP> max_out_samplerate type  0x00000000

<APP> TAGC OFF
VP_FILTER.c(535): Run...
~din run fmt 2 change st
~vpp proc cmd 16
VP_FILTER.c(540): Run...done

[13:55:34.056]收←◆[AI] c[hgv o]s rcV(1o/8d/m5)
aP(B0) f odcusis[0a]bl =e  0
x0[v00o00]00 V1,O DmuMAx_(in =0)   0Fxo0r0ce00BG000(80)

set PB/TS Main new source clk ready
<APP> SpeedScale delaybuf flush  0x00000000
[AI]hpt end

[13:55:34.119]收←◆RPC ao swap channel  0x00000000

[13:55:34.275]收←◆[Pass through  0x00000000: 0x00000001]
ENABLE PB WrADMA ipt_focus_id: 0x00000001,SPDIFI_CS_REG.hw_locked: 0x00000000
$$$deliever PB info ok$$$

[13:55:34.322]收←◆[AE] samplerate pre = ( 0x0000bb80, 0x0000bb80), now = ( 0x0000bb80, 0x0000bb80)
[AE] SRC off
[AO][hpt]end
[AO][PB]Enable RdAdma

[13:55:34.775]收←◆
AllocateDiskDB::Visitor
AllocateDiskDB success  :/data/ChDB.db  !
DataBaseImpl:open database successful !  pthread_self(): 1090868188   ,DBName:[ /data/ChDB.db ]
This  is DiskDB Config!
This is DataBaseImpl Config()!

[13:55:34.837]收←◆

sqlite3_libversions:3.7.11------threadsafe:2  ,thread_ID :1090868188


NodeImpl::Visitor

size is:1
NodeImpl::Visitor

AllocateDiskDB::Visitor

AllocateDiskDB::Visitor

AllocateDiskDB::Visitor
AllocateDiskDB success  :/data/DTMB_ChDB.db  !
DataBaseImpl:open database successful !  pthread_self(): 1090868188   ,DBName:[ /data/DTMB_ChDB.db ]
This  is DiskDB Config!
This is DataBaseImpl Config()!

[13:55:34.947]收←◆

sqlite3_libversions:3.7.11------threadsafe:2  ,thread_ID :1090868188


NodeImpl::Visitor

size is:1
NodeImpl::Visitor
DataBaseImpl:open database successful !  pthread_self(): 1090868188   ,DBName:[ file::memory:?cache=shared ]
This  is MemoryDB Config!
This is DataBaseImpl Config()!


sqlite3_libversions:3.7.11------threadsafe:2  ,thread_ID :1090868188


NodeImpl::Visitor

size is:1
CreateStructByFilevisitor,  attr type is createfile!!

NodeImpl::Visitor

NodeImpl::Visitor

size is:1
NodeImpl::Visitor

AllocateDiskDB::Visitor

AllocateDiskDB::Visitor
AllocateDiskDB success  :/data/ConfigDB.db  !
DataBaseImpl:open database successful !  pthread_self(): 1090868188   ,DBName:[ /data/ConfigDB.db ]
This  is DiskDB Config!
This is DataBaseImpl Config()!


sqlite3_libversions:3.7.11------threadsafe:2  ,thread_ID :1090868188


NodeImpl::Visitor

[13:55:42.822]收←◆dl  0x00000013 ms  

[13:55:43.697]收←◆[  172.721945] lowmem_shrink: convert oom_adj to oom_score_adj:
[  172.727776] oom_adj 0 => oom_score_adj 0
[  172.731805] oom_adj 1 => oom_score_adj 58
[  172.735920] oom_adj 2 => oom_score_adj 117
[  172.740121] oom_adj 4 => oom_score_adj 235
[  172.744320] oom_adj 9 => oom_score_adj 529
[  172.748518] oom_adj 15 => oom_score_adj 1000

[13:55:44.994]收←◆[  174.010405] #@# hub_power_on(894) delay for 4 secs

[13:55:49.431]收←◆[  178.440911] init: sys_prop: permission denied uid:1003  name:service.bootanim.exit

[13:55:51.353]收←◆dl  0x00000013 ms  

[13:55:59.900]收←◆dl  0x00000013 ms  
------------------------------------------------------------------------------------------------

请问这种情况可能是哪里的问题？

张晋伟

换个EMMC,试试。王牌通病

得过且过O32152

真是辛苦了，我5天打不了这些字。

吴亮凯

发铁怎么可以打那么多字，没限制的吗？

zhangwenzhuang

牛。。。。。

wfng

谢谢，芯片比主板都贵。

shgt

遇到同样机子，刷程序，也没修好，，

鼓屏山人

终于刷到底了………版主呢？！

1450242788

修好了吗？我有台TCL也是一样情况！

1450242788

张晋伟 发表于 2020-2-22 18:57
换个EMMC,试试。王牌通病

换EMMC还能强刷吗？请指点！